The startup steps of the high-speed nail making machine can be divided into
the following stages:
1. Preparation
Check whether the whole machine is in a stable and horizontal state, and
ensure that the machine is placed smoothly and will not shake or shift during
work.
Check whether there are any foreign objects such as debris inside the
equipment to prevent damage or danger during machine operation.
Check whether the nail gun is locked and make sure the nail gun is in a safe
state before starting it.
Check whether the fault light is normal so that you can be prompted in time
when the machine fails.
Turn on the air source, check whether the gas is sufficient and whether the
air pressure is normal, and ensure that the machine has sufficient air pressure
support when working.
2. Booting steps
Turn on the main power switch, and the operation panel will appear.
Turn on the air source switch to ensure that the fully automatic high-speed
nail making machine can use the air source.
Click the "Start" button on the operation panel and wait for the device to
start.
After the equipment is started, the workpiece to be processed is placed in
the nail making area.
Press the travel switch on the nail gun, and the fully automatic high-speed
nail making machine will perform the nailing operation according to the preset
plan.
3. Precautions
Under no circumstances should the equipment be operated or touched while it
is running to ensure the safety of the operator.
Operators should wear safety protective equipment such as safety helmets and
safety shoes to prevent possible injuries.
When any fault or abnormal situation is discovered, the machine must be shut
down in time to avoid causing greater losses or dangers.
When adjusting equipment parameters, or replacing tooling, molds, etc., it
must be done with the equipment stopped to ensure the safety and accuracy of the
operation.
The above is a detailed explanation of the startup steps and precautions of
the high-speed nail making machine. Be sure to follow the steps and make sure
you follow all safety regulations.
Yifa Metal Technology is professional in Straight line drawing machine, wet drawing machine for low carbon steel wire, medium carbon steel wire high carbon steel wire, stainless steel wire, MIG/welding Co2 wire product machine; meanwhile investment cooperation in making galvanized wire machine, Annealing furnace, high speed nail making machine.Please contact us if you need it!
www.yifam.com
Yifa
